12 Port Rack Mount 24v POE Injector for OM2P Series
- Brand: Open Mesh
- Product Code: POE12PORT
- Availability: In Stock
An injector is required to power the OM2P and OM5P series via Ethernet, and this rack mounted passive injector will power 12 access points with the included power supply (EU/UK/US Plug).
It combines power from the power supply with Ethernet from your LAN switch or router and outputs a combined power and Ethernet signal compatible with the OM2P. Includes 24V/5A power supply.
Power is provided over pins 4+5 (+) and 7+8 (-).
Note: This product is not compatible with MR Series access points.
- rack mount : 12 LAN ports, 12 LAN+Power ports, 650 ma per port limiter
- 2.1mm x 5.5mm DC input Jack
- Data pairs for each RJ45 – 1 and 2, 3 and 6 pass thru LAN to POE
- + 48 volts on pins 4 and 5
- return voltage on pins 7 and 8
- 10/100 data rates supported
- 12x self resetting 650 ma fuses limit load to 30 watts per port
- Rack Mount – 1U high 19 inch standard
- 19 x 1.75 x 1 inches
|Input||100-240VAC frequency 50/60Hz surge<50/A/240V|
|Output||18v voltage tolerance ±5%, ripple and noise(mVp-p)<1% output voltage, start time< 1s,hold up time> 20ms (input=240v, lo=100%) Build in over current, over load, short circuit protection, Recover automatically|
|Insulation||HI-PORT; 3000Vac/10mA 1 min|
|Operation Temperature||0~45℃, 5%~90%RH|
|EMC||EN55022B, GB9254, FCC, VCCI|
|Dimension Size||W482 x D21 x H42mm and L170 x W70 x H40mm IEC power connector with 50cm cord|
|Safety Accord||UL/cUL, FCC, TUV/GS, CE, SAA, KO, PSE, BSI|
|Storage Temperature||-20~85℃, 5%~95%RH, Altitude<3000M|